Mr. Color

Mr. Hobby's Mr. Color has been a standard model paint for over 40 years since its release, receiving high praise from modelers around the world.

<Product Features>

• With a rich array of colors, it can be used to paint various model genres such as characters and scales (tanks, planes, ships).
• It uses a wide variety of pigments and metallic particles, often providing better coloration than water-based paints (especially metallic and blue paints).
• As it's a solvent-based paint, it dries quickly.
• After drying, the paint film is hard and a beautiful glossy surface can be obtained.
• The resin used has a good thickness, forming an optimal paint film.

<About dilution and the number of times to paint>

• When painting with Mr. Color, it needs to be diluted appropriately with Mr. Color Thinner.
• Mr. Color Thinner can also be used to clean brushes and airbrushes used with Mr. Color.
• Compared to water-based paints, the paint viscosity is higher. If it's difficult to paint with a brush, add Mr. Color Thinner (Guideline: Paint: Thinner = 1: up to 1). Also, by adding a few drops of the exclusive Mr. Retarder Mild, the drying speed will decrease, and brush strokes can be reduced.
• When airbrushing, dilute the paint in accordance with its viscosity, with a guideline of paint 1: up to 2 thinner. When using an airbrush, don't paint all at once. For the first time, just lightly paint the whole, and then apply thin overcoats 2-3 times.

<How to adjust from gloss to semi-gloss/matte>

• The glossiness of Mr. Color can be adjusted with C30 Flat Base. To make a semi-gloss finish, mix about 5-10% of Flat Base into the paint. Also, by mixing about 10-20% of Flat Base into the paint, it becomes a matte finish. By adjusting the ratio of Flat Base, you can adjust to various levels of glossiness.

Please note:

• It is a paint that contains organic solvents. Please ensure good ventilation during and after use.
• You cannot use it mixed with other model paints, other than Mr. Color and Mr. Color GX.