GodHand - Blade One Nipper PN-120 (w/ Protection Cap)

Stronger and easier to handle than the SPN-120 Ultimate Nipper! The standard model for single-edge nippers.

The PN-120 Blade One Nipper is a single-edge nipper for plastic models.
Compared to the SPN-120 Ultimate Nipper, the blade is thicker, so the cut surface may show slightly more pressure from the backing-blade side. However, the thicker blade gives it improved durability.

• Single-edge structure that can be used in the same way as the Ultimate Nipper
• Blade angle adjusted for longer blade life compared to the Ultimate Nipper
• While the Ultimate Nipper can cut clear plastic up to φ1mm, the PN-120 Nipper supports clear plastic up to φ2mm
• The cutting feel is slightly heavier than the Ultimate Nipper, but the cut surface is almost the same when slice-cutting
• Includes an original nipper cap for convenient storage

● Specifications

• Total length: Approx. 120mm
• Weight: Approx. 60g
• Single-edge design
• Blade-break prevention stopper
• Over-opening prevention pin
• Spring included
• Original nipper cap included

● Cutting Capacity

• Compatible materials: Plastic only, including PS, PP, ABS, and PE resin
• Cutting capacity: Compatible materials up to φ3mm only
  However, clear and semi-clear PS resin is harder, so it is limited to φ2mm or less.

⚠ Cautions

• This is a delicate nipper focused on cutting performance. Incorrect use may chip or break the blade.
• It cuts with very little force, so do not squeeze harder than necessary.
• The blade becomes thinner toward the tip and is easier to break there, so cut as close to the middle of the blade as possible.
• Do not twist the blade while cutting or when removing it from the runner after cutting. Twisting adds stress and may break the blade.
• Do not cut anything that does not fit within the blade length. Concentrated force on one point of the blade may cause it to break or bend.
• Do not use it to cut plastic thicker than its cutting capacity or unsupported materials such as metal, resin, paper, etc.
• Do not use it for cutting plastic sheet, tags, parts, dowels, or similar tasks.
• During and after use, remove plastic shavings from the blade with a toothbrush or blade brush. If shavings remain on the blade during cutting, unnecessary stress may be applied and cause damage. In particular, shavings trapped near the base of the blade may cause looseness in the moving parts.
• Do not touch the cutting edge directly. It is a sharp blade and may cause injury.
• Skin oils can cause rust. If you touch the metal parts directly, wipe off fingerprints and apply anti-rust oil.
• Moisture can also cause rust, so apply oil regularly during humid seasons.
• If lubrication in the moving parts decreases, the pivot may wear down, causing looseness and reduced cutting performance. Apply lubricant to the moving parts regularly.
• Wear safety glasses for protection.
• Cut pieces may fly off. Before working, make sure no one is nearby and there are no fragile items around.
• Keep out of reach of small children.
• When not in use, attach the included nipper cap and store safely.